#
Step 1:ComboFix
is a program, created by sUBs,
that scans your computer for known malware,
and when found, attempts to clean these
infections automatically. In addition to
being able to remove a large amount of the
most common and current malware, ComboFix
also displays a report that can be used
by trained helpers to remove malware that
is not automatically removed by the program.
You
should not run ComboFix unless you are specifically
asked to by a helper. Also, due
to the power of this tool it is strongly
advised that you do not attempt
to act upon any of the information displayed
by ComboFix without supervision from someone
who has been properly trained. If you do
so, it may lead to problems with the normal
functionality of your computer.
Please
note that this guide is the only authorized
guide for the use of ComboFix and cannot
be copied without permission from BleepingComputer.com
and sUBs. It is also understood that the
use of ComboFix is done at your own risk.
#
Step 2: Using
ComboFix
The
first thing you should download ComboFix
from one of the following URLs:
To
download ComboFix, simply left-click on
one of the links above and you will see
a prompt similar to the figure below.

Download ComboFix Prompt
Click
on the Save button, and
when it asks you where to save it, make
sure you save it directly to your Windows
Desktop. An image showing
this is below.

Downloading ComboFix to the Desktop
When
you have the Save as screen configured to
save ComboFix.exe to the Desktop, click
on the Save button. ComboFix
will now start downloading to your computer.
If you are on a dialup, this may take a
few minutes. When ComboFix has finished
downloading you will now see an icon on
your desktop similar to the one below.

ComboFix Icon
We
are almost ready to start ComboFix, but
before we do so, we need to take some preventative
measures so that there are no conflicts
with other programs when running ComboFix.
At this point you should do the following:
- Close
all open Windows including this one.
- Close
or disable all running Antivirus, Antispyware,
and Firewall programs as they may interfere
with the proper running of ComboFix.
Instructions on disabling these type
of programs can be found in this
topic.
Once
these two steps have been completed, double-click
on the ComboFix icon found on your desktop.
Please note, that once you start ComboFix
you should not click anywhere on the ComboFix
window as it can cause the program to stall.
In fact, when ComboFix is running, do not
touch your computer at all. The scan could
take a while, so please be patient.
Once
you double-click on the icon, you may see
a screen similar to the one below.

Windows Open File Security Warning
Windows is issuing this prompt because ComboFix
does not have a digital signature. This
is perfectly normal and safe and you can
click on the Run button
to continue. If you are using Windows Vista,
and receive UAC prompt asking if you would
like to continue running the program, you
should press the Continue
button.
You
will now see the first ComboFix screen as
shown below.

ComboFix is Preparing to Run
ComboFix
is now preparing to run and when it has
finished you will see a screen showing the
authorized locations to download Combofix.
This screen, press the OK button and you
will now see the Disclaimer screen shown
below.

ComboFix Disclaimer
If
you do not agree to the disclaimer, then
click on the No button
to exit the program. Otherwise, to continue
you should press the Yes
button to continue. If you decided to continue,
then ComboFix will create a System Restore
point so that if any problems occur while
using the program you can restore back to
your previous configuration. When ComboFix
has finished creating the restore point,
it will then backup your Windows Registry
as shown in the image below.

ComboFix is backing up the Windows
Registry
Once
the Windows Registry has finished being
backed up, ComboFix will attempt to detect
if you have the Windows Recovery Console
installed. If you already have it installed,
you can skip to
this section and continue reading. Otherwise
you will see the following message as shown
below:

ComboFix Recovery Console
At
the above message box, please click on the
Yes button in order for
ComboFix to continue. Please follow the
steps and instructions given by ComboFix
in order to finish the installation of the
Recovery Console. Once it has finished installing,
you will be presented with the screen shown
below.

ComboFix Recovery Console Finished
You
should now press the Yes
button to continue. If at any time during
the Recovery Console installation you receive
a message stating that it failed to install,
please allow ComboFix to continue with the
scan of your computer. When it is done,
and a log has been created, you can then
perform the manual install of the Recovery
Console using the steps found in the Manually
installing the Windows Recovery Console
section.
ComboFix
will now disconnect your computer from the
Internet, so do not be surprised or concerned
if you receive any warnings stating that
you are no longer on the Internet. When
ComboFix has finished it will automatically
restore your Internet connection.
ComboFix
will now start scanning your computer for
known infections. This procedure can take
some time, so please be patient.

ComboFix is scanning the computer
for infections
While
the program is scanning your computer, it
will change your clock format, so do not
be concerned when you see this happen. When
ComboFix is finished it will restore your
clock settings to their previous settings.
You will also see the text in the ComboFix
window being updated as it goes through
the various stages of its scan. An example
of this can be seen below.

Stages of the ComboFix AutoScan
At
the time of this writing there are a total
of 41 stages as shown in the image below,
so please be patient. The amount of stages
will go up as time goes on, so if the amount
of stages is different when you run it,
please do not be concerned.

41st Stage of the ComboFix AutoScan
When
ComboFix has finished running, you will
see a screen stating that it is preparing
the log report as shown below.

ComboFix is preparing the log report
This
can take a while, so please be patient.
If you see your Windows desktop disappear,
do not worry. This is normal and ComboFix
will restore your desktop before it is finished.
Eventually you will see a new screen that
states the program is almost finished and
telling you the programs log file, or report,
will be located at C:\ComboFix.txt.
This can be seen in the image below.

ComboFix is almost done!
When
ComboFix has finished, it will automatically
close the program and change your clock
back to its original format. It will then
display the log file automatically for you
as shown below.

ComboFix Log File
You
should now post this log as a reply to the
topic where you were asked to run combofix.
Your helper will now analyze this log and
let you know what they would like you to
do next. If you having problems connecting
to the Internet after running Combofix,
then please read the Manually
restoring the Internet connection section.
It
is possible that ComboFix, even on its first
run, may have fixed the problems you are
having. We strongly suggest that you still
post your log into the topic that you are
receiving help as you most likely will have
infections left over that your helper will
need to analyze further.
Manually
installing the Windows Recovery Console
In
the event that the automatic install of
Recovery Console was not possible, you should
follow the steps listed here in order to
manually install it. The Windows recovery
console is a tool that will allow you to
boot up into a special recovery mode that
allows us to help you in the case that your
computer has a problem after an attempted
removal of malware. If you use Windows XP
and have a Windows CD, then you can follow
the instructions found in the tutorial listed
below.
How
to install and use the Windows XP Recovery
Console
Windows
Vista users can use their Windows DVD to
boot up into the Vista
Recovery Environment.
If
you use Windows XP and do not have the Windows
CD, ComboFix includes a method
of installing the Windows Recovery console
by downloading a file from Microsoft. To
install the Windows Recovery Console when
you do not have the Windows XP CD, please
follow these instructions:
- Click
on the following link to go to Microsoft's
Web site:
http://support.microsoft.com/kb/310994
-
At that page, scroll down and click
on the appropriate download for your
version of Windows XP (Home or Professional)
and the service pack level that you
have installed. When you click on the
link to download the file, make sure
you save it directly to your desktop.
If you are using Windows XP Service
Pack 3 (SP3), then select the Service
Pack 2 download. If you are using Windows
XP Media Center, then you should select
the Windows XP Pro Service Pack 2 download.
If you are unsure what version of Windows
you have and what Service Pack is installed,
you can follow these instructions to
gain that information.
- Click
on the Start button.
- Click
on the Run menu
option.
- In
the Open: field
type the following: sysdm.cpl
and then click on the OK
button.
- A
screen will appear showing information
about your installation. Under the
System: category
you should see your Windows version
and the installed Service Pack.
When you are done determining this
information continue with Step
2.
- Once
the Microsoft file has finished downloading,
you should drag it on top of the ComboFix
icon and let your mouse button go. This
is shown in the following image.

- ComboFix
will now automatically install the Windows
Recovery Console onto your computer,
which will show up as a new option when
booting up your computer. Do not select
the Windows Recovery Console option
when you start your computer unless
requested to by a helper.
Once
the Windows Recovery Console has finished
installed, ComboFix will open a prompt stating
that it was installed and asking if you
would like to proceed with scanning your
computer. If you wish to continue, then
press the Yes button and continue
reading the tutorial from here.
Manually
restoring the Internet connection
If,
by some chance, you no longer have access
to your Internet connection after running
ComboFix then the first thing to try is
to reboot your computer. This step alone
should fix the vast majority of issues with
no Internet connection after running ComboFix.
If you still do not have an Internet connection
after rebooting then please perform the
following steps:
- Click
on the Start button.
- Click
on the Settings menu
option.
- Click
on the Control Panel
option.
- When
the Control Panel opens, double-click
on the Network Connections
icon. If your Control Panel is set to
Category View, then double-click on
Network and Internet Connections
and then click on Network Connections
at the bottom.
- You
will now see a list of available network
connections. Locate the connection for
your Wireless or Lan adapter and right-click
on it.
- You
will now see a menu similar to the image
below. Simply click on the Repair
menu option.

Repair Internet Connection
- Let
the repair process perform its tasks
and when it has finished, your Internet
connection should be working again.
Alternatively,
if your network icon also appears on the
Windows taskbar, then you can repair it
by right-clicking on the icon and selecting
Repair as shown below.

Repair Internet connection via Tray
Icon